Cart (0)

Product Categories+

The Barbican


Any sales taxes will be calculated in the checkout.

The Barbican is a multi part model designed to be compatible with the 2″ (50mm) building system, and used as a fortified outpost or gatehouse. It is designed to work with the castle gate and barbican hoarding.

This file pack also contains bridge sections, cobblestones and road.

The Winterdale buildings are designed to be glued and placed together.

This product is part of the Winterdale Complete. Please log in if you backed the campaign.

This product is delivered as a .ZIP file pack containing STL files for use on a home 3D Printer.


From above, a trumpet sounds, followed by a rain of arrows. Above the sturdy walls of the outpost, flicker the telltale movements of archers, readying their next volley.



  • 28 May 2018 (version 5.4) WDTurret5.2-small-full-window and WDTurret5.2-small-ring added for support when using in conjunction with Barbican Hoarding.
  • 13 November 2018 (version 5.5) Turret Crenellations added.


Included in the Gallery is an image showing the Barbican used with Citadel Walls and Citadel Towers.

  • Right Click and “Save As” to download the reference sheet below.
  • Product measurements can be found in the image gallery.

Barbican Reference 


Turret Small Printer Reference

Additional information



Layer Height

.2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)


Prints without Supports


This model is set to 28mm scale. To scale to 15mm reduce the model to 60% in your slicer before printing.

9 questions for The Barbican

  1. Daan Christenhusz

    Hi there,
    Is this 28mm scale or should it be scaled down?


    • Matthew Barker

      Yes it’s set to 28mm scale

  2. ah135481 (verified owner)

    Can I get more info on resizing the Citadel walls to work with the barbican?

    Using Slic3r PE

    • Matt Barker (verified owner)

      I’ll check this today and get back to you by the end of the day

  3. mhurlburt (verified owner)

    Is there a turret part with supports (like the walls) that would support the hoarding turret tops?

    • Jo Boorer

      Have just WDTurret5.2-small-full-window and WDTurret5.2-small-ring that has supports.

  4. mhurlburt (verified owner)

    The “WDTurret5.2-small-full-window” file does not appear to have supports included. Is the ring designed to go around the tower or on top of it?

    • Jo Boorer

      The Ring is designed to go on top of the WDTurret5.2-small-full-window.

  5. Sean Abel

    Do you section of the Towers that have more then 1 wall section connection, AKA The basic picture shows the wall section attaching to the towers on the right but what if the wall continues through to the other side with a tower section in the middle? Just asking for a friend 🙂

    • Sam Campbell

      You can customize your Turret tower by printing the round Turret tower level in 4 pieces so you can print WDBarbican5.0-Turret-bottom.stl twice and add in some other Turret pieces.

  6. travisharris (verified owner)

    Is there a crenulation style top piece from any set that would work with the turret sections of this set

    • Sam Campbell

      Not at this stage. We have added it into our development queue for assessing.

  7. barberio.joseph

    Does this work with smaller printers like some of the other sets? I have a print area of 4.5×2.5×6

    • Sam Campbell

      Most of the pieces will work. The curved corridors and full turret levels will not. These full levels are merges of the smaller pieces.

  8. happydevil43

    Does the Rampage tower bundle connect to the walls instead of the tower that comes with it ?

    • Matt Barker (verified owner)

      This is the Barbican, which tower were you referring to?

  9. happydevil43

    The tower I was referring to was the The Large Square Tower or the Round tower .. .

Add a question
©2024 Printable Scenery. Website by Vienna & Bailey