Iron Girders

$3.95

Any sales taxes will be calculated in the checkout.

The Iron Girders are two wall piece tiles, compatible with all other OpenLOCK products. Suspend heavy industrial equipment up off the ground or create a maze of raised walkways, all supported by these strong iron girders.

Download the Rampage Base Pack for free to get the latest version of the OpenLOCK clip.

This product is part of the Gothic Industrial

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

Sturdy crossbeams brace wide steel walkways that rise above the steam and smog of factory floors, providing a good observation platform for factory overseers.

Notes for Iron Girders:

The Gallery image example uses the Industrial Walkway, Ladders, and Blast Shields OpenLOCK tiles.
Right-click on the image below and “Save As” to download the reference sheet for this pack.
Product measurements can be found in the image gallery.

Additional information

Recommended Printer	FDM or resin printer
Infill	100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Supports	requires supports for resin printing, Prints without Supports
Scale	28mm Wargames

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	35.7%
15mm Wargames	15	1:116	53.6%
HO Scale	20	1:87	71.4%
OO Scale	22	1:76	78.6%
28mm Wargames	28	1:62	100.0%
32mm Heroic & OpenLOCK	32	1:54	114.3%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)