Description
Queen Juliette woke in her quarters to the creaking of her door in the middle of the night. She’d dismissed her maidens hours ago, and they knew better than to disturb her, which was all the more disturbing. She sat up, just in time to see the shifting shape in the darkness and the sharp glint of a blade in the moonlight. But Juliette was prepared; from under her pillow, she pulled her dagger and plunged it into the dark shape before her. The assassin fell bleeding on the bed, just as she heard the distant bell signalling an attack.
Find out about how to use SystemHEX in our article here.
Our paint guide for castle bricks is here, and painting Wattle & Daub and Roof tiles is here. Check out this article here for tips on printing Throne & Ash models.
Updates:
- 30 May 2025 (version 2.3): This version now contains Arch Plug and corrections made to all Lv1 options. The Square Bastion comes with other Lv1 options.
- 6 June 2025 (version 2.4) A tighter-fitting corbel has been added for FDM printing.
- 11 June 2025 (version 2.5) Adjusted the hole size at the top of the Hex Tower roof to allow the Spire to fit better.
- 12 June 2025 (version 2.6) Chimney option without fire added.
- 1 August 2025 (version 2.7) Small printer cuts of the chimneys are now available.
Notes for 3d Print file:
- Right-click on the image below and “Save As” to download the reference sheet for this pack.
- A small printer reference is included in the zip file.
- I recommend using a layer height of 0.1 mm when printing the corbel and effigy.
- Product measurements can be found in the image gallery.
- First Published version 2.2
Queens Quarters Reference
Buttresses, Adaptors and Ladders Reference
Hex Tower Reference
Square Bastion Reference
Milen Donchev (verified owner) –
Another great model from the HEX system.
I see one big improvement that can be made with the new model additions:
With the addition of the “Queens-Quarters-Square-Bastion-Crenellations” roof piece AND
after you made the “Hex-Tower-Roof-Trussle” part (from the Hex Castle Keep Tower) you really need to make the equivalent part for the square towers, so we can put the “Hex-Square-Bastion-Roof” on top!
Again, great work!
Joanne Boorer (verified owner) –
We Have got this down on our list to add to a future product and make available in Queens Quarters at the same time.
Will Spargur (verified owner) –
Hi! The roof spire for the hex tower is loose. None of the spires or flags fit snuggly, and we’d really like to not have to glue them in if we can avoid it. Otherwise, we love this building!
Joanne Boorer (verified owner) –
Thanks for pointing this out. Have passed this on to a modeler to fix.
Ashes (verified owner) –
Awesome. I finally repaired my printer and bought another I now have a combine living quarters + king’s keep and Queen’s quarter and it is perfect, can wait for the rest!
One thing on the other hand is the hole for trap doors, could there also be a plug that is a regular floor? I have literally had to put carpet to hide it so my players won’t constantly ask what can be traveled through
Will Spargur (verified owner) –
Hello! Wonderful model! Incredible stuff, I’m so glad I joined during the campaign. Little question though…is there a modeling reason that the slots for the corbels are circular and the actual slide on the corbels is diamond shaped? They fit very loosely, and it’s just kind of odd. It’s like this for the majority of the buildings with corbels. I’d like them a lot more if they were more snug in their slots.
Joanne Boorer (verified owner) –
Hi Will. Depending on Print settings we have had people say too tight or loose so have 2 options now included in the products. Did you use the FDM option?