OpenLOCK Graveyard

$9.95

Any sales taxes will be calculated in the checkout.

The OpenLOCK Graveyard is a set of spiked low walls and gate that clip together using the OpenLOCK system. This allows you to customize your graveyard between games. It also contains a variety of gravestones and a set of walls without spikes.

This model is part of the Cities of Ramshackle & Ruin Campaign

This product is part of the Cities of Ruin Bundle

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

The 3D print file for the OpenLOCK graveyard offers a modular, clip-together system that lets you construct an expansive Graveyard limited only by your imagination. The sinister spiked bars serve a dual purpose: a grim barrier designed to keep the living from intruding while ensuring the restless dead remain confined. As you assemble each piece, the chilling reality of its macabre function becomes clear—a grim reminder that this graveyard is not merely a place of rest but a foreboding prison for the departed.

Notes for Graveyard 3d Pint file:

Right-click on the image below and “Save As” to download the reference sheet for this pack.

Click here for the link to the OpenLOCK clips.

Important: This product is scaled to 32mm. To print it at 28mm to match the other 28mm terrain, scale it to 90%.

Product measurements can be found in the image gallery.

First Published version 1.1

Additional information

Recommended Printer

FDM or resin printer

Terrain Tinker

Available

Infill

100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength

Layer Height

0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)

Scale

32mm Heroic & OpenLOCK

Supports

requires supports for resin printing, Prints without Supports

Name

Millimeters mm

Ratio

Scale %

10mm Wargames & N Scale

1:159

31.3%

15mm Wargames

1:116

46.9%

HO Scale

1:87

62.5%

OO Scale

1:76

68.8%

28mm Wargames

1:62

87.5%

32mm Heroic & OpenLOCK

1:54

100.0%

Creating Magnetic Dungeon Tiles with OpenLOCK

Posted on July 21, 2025July 22, 2025 by Sloane Dougherty

This article will show you how to use the OpenLOCK Magnetic Clip to build fully interchangeable dungeons with magnets. Once you’ve built a collection of these magnetic clips, you can swap and change dungeon layouts in no time. The Magnetic Clip is an OpenLOCK adapter option. It is interchangeable with other OpenLOCK clips but is… Read more

Building a modular Ramshackle board for gaming

Posted on January 28, 2025July 23, 2025 by Sloane Dougherty

Warbands fight on cobblestone streets, ruins filled with danger and loot, and tall buildings for dramatic leaps of faith. These are all dream scenarios for fantasy wargamers and role-players. But having the right kind of board that enables this and gives you a different experience each time you play on it can take some work…. Read more

19 Comments

How to build and connect city foundations

Posted on January 17, 2025July 23, 2025 by Matt Barker

The City Foundations from the Ramshackle and Ruins set is a modular system of 3D-printed walls and floor pieces designed in a way that lets you build a huge variety of layouts and terrain boards. They use OpenLOCK to connect and use a consistent mathematical 4×4 grid, so you never get caught up with random… Read more

9 Comments

Removing supports from the OpenLOCK ports

Posted on August 24, 2017July 22, 2025 by Dee Barker

Horizontal OpenLOCK ports print with small supports to support the overhangs in the port mouth. You need to remove these supports post-printing before you can insert the OpenLOCK clips. We recommend using some needle-nosed pliers for this task. You can use the pliers to grip and twist the two supports in each port, breaking them… Read more

6 Comments

Comments

kawaiirobo (verified owner) – March 4, 2025

Hi, is there a pass through open lock clip that works with the graveyard I column? it can’t accommodate clips on both sides.

Joanne Boorer (verified owner) – March 7, 2025

We are currently making our own pass through clip. In the meantime there is one available at https://www.thingiverse.com/thing:2192352

h.c.nelson1 (verified owner) – August 4, 2025

Looks like you are making a passthrough clip, was just about to ask as well

Joanne Boorer (verified owner) – August 4, 2025

Thanks for your added request. We still have not made this clip yet. There is a OpenLOCK pass through clip that is compatible on https://www.thingiverse.com/

kawaiirobo (verified owner) – March 4, 2025

Hi, is there a pass through open lock clip that works with the graveyard I column? it can’t accommodate clips on both sides.
- Joanne Boorer (verified owner) – March 7, 2025
  
  We are currently making our own pass through clip. In the meantime there is one available at https://www.thingiverse.com/thing:2192352
h.c.nelson1 (verified owner) – August 4, 2025

Looks like you are making a passthrough clip, was just about to ask as well
- Joanne Boorer (verified owner) – August 4, 2025
  
  Thanks for your added request. We still have not made this clip yet. There is a OpenLOCK pass through clip that is compatible on https://www.thingiverse.com/