The Pig Pen – Hagglethorn Hollow

$9.95

Any sales taxes will be calculated in the checkout.

The Pig Pen is a 3D printable piece of scatter terrain for the Hagglethorn Hollow series. Including separate pigs and an empty pen version, the Pig Pen is designed to fit alongside the Hens Tower and Oxen Enclosure to add depth and character to your next game.

If you are a Kickstarter backer you must login to access your pledge

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

Of all the animals brought over the mountain paths, Pigs are one of the most versatile. Not only do they provide good food for the inhabitants of the hollow, but they also act as the town’s waste disposal system. As many residents keep some pigs nearby to their homes, the sound of the pens is a constant background noise to the everyday happenings in Hagglethorn Hollow.

Bring Johnny Fraser-Allen’s enchanting world of Hagglethorn Hollow to life on your tabletop.
This detailed 3D-printable tower is part of the official Hagglethorn Hollow range, originally sculpted and envisioned by Tabletop Troubadour Games and now available as a print-ready STL file exclusively through Printable Scenery.

Crafted for modular play, this model connects seamlessly with other Hagglethorn Hollow buildings to create a living, breathing fantasy village full of character and story. Whether for roleplaying adventures, wargames, or display pieces, the Hagglethorn Hollow Tower brings a unique atmosphere to any tabletop setting.

The Pig Pen comes with three different versions for printing options included in the download:

Main Folder- A folder containing the model cut into pieces for most conventional FDM 3D printers with a print bed size of 200mm x 200mm x 200mm
FDM With Supports- A folder containing pre-supported pieces to allow printing without overhangs
Resin Pre-Supports- Small printer cuts with pre-generated supports for resin printing.

Notes:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Product measurements can be found in the image gallery.
Copyright Printable Scenery under license from Tabletop Troubadour Games
First Published version 1.0

Hagglethorn Hollow is the creation of Johnny Fraser-Allen and Tabletop Troubadour Games.
Printable Scenery is the exclusive authorised distributor of Hagglethorn Hollow STL files.

Additional information

Recommended Printer	FDM or resin printer
Infill	100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Supports	pre-support version included in download., requires supports for resin printing, Prints without Supports
Scale	28mm Wargames

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	35.7%
15mm Wargames	15	1:116	53.6%
HO Scale	20	1:87	71.4%
OO Scale	22	1:76	78.6%
28mm Wargames	28	1:62	100.0%
32mm Heroic & OpenLOCK	32	1:54	114.3%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

Painting Hagglethorn: Garden Fences

Posted on August 20, 2021September 30, 2025 by Mike Los

The Garden Fences from Hagglethorn Hollow add a lot of character to your games and importantly for your troops, they add cover! We’ve used this method on the Common Gardens as well as the fences but it would also be useful for any other wicker or stick surfaces you might come across. Painting these is… Read more

Comments

Jojo (verified owner) – October 31, 2021

I love the piglets but i can’t print the roof. It turns into a mess of filament every time. Is it really supposed to work without adding supports?
- Mike (Printable Scenery) (verified owner) – November 1, 2021
  
  Hi Jojo,
  
  Theres a folder in the download with a pre-supported version of the roof for FDM printing that should print out just fine.
  If you’re still having trouble with it get in touch with [email protected] and we’ll get to the bottom of it
car_tag (verified owner) – December 14, 2021

Would it be possible to get a singular piglet modeled separately? That would be a perfect loot token for Frostgrave or an objective marker for other games.
- Nicholas Jebson – December 14, 2021
  
  We can certainly add it to the updates list, as that is a fantastic idea!