The Shadow Throne

$7.95

Any sales taxes will be calculated in the checkout.

The Shadow Throne is a stand alone piece of scatter terrain depicting the throne of the mysterious Shadow King, designed for use in wargames and role play games.

When FDM printing we highly recommend turning on supports touching the build plate, this will support the bat wings during the build and give extra stability to the skeletal wings, making it less likely the nozzle will knock them over.

There are both hollowed and pre-supported files for those resin printing the throne.

This product is part of the Shadowfey Wilds

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

Few have looked upon the Shadow King and lived to tell about it. What information the populace have can be inferred from his throne, that he stands far taller than the average man and has a morbid flair for the dramatic.

Notes:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Product measurements can be found in the image gallery.
Hollow version and pre-support version for resin printers included in the zip file.
First Published version 1.1

Additional information

Recommended Printer	FDM or resin printer
Infill	100% for resin printing, 15%
Layer Height	0.05 high quality on resin printers, 0.1 high quality on FDM printers
Supports	requires supports for resin printing, Supports touching buildplate
Scale	28mm Wargames

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	35.7%
15mm Wargames	15	1:116	53.6%
HO Scale	20	1:87	71.4%
OO Scale	22	1:76	78.6%
28mm Wargames	28	1:62	100.0%
32mm Heroic & OpenLOCK	32	1:54	114.3%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

Comments

mauro_arguelles (verified owner) – January 15, 2021

cool!
antonio.martorell (verified owner) – January 15, 2021

Should Review the wings as they are “middleair” and fail to print without supports… not sure if depending of the speed of the printer and setting it’s possible but with mine was imposible)… Amazing job
- Nicholas Jebson (verified owner) – January 18, 2021
  
  We highly recommend supports touching buildplate for that reason.
diaz.randres (verified owner) – January 16, 2021

Will the wings need supports for FDM printers? It seems like it…
- Nicholas Jebson (verified owner) – January 18, 2021
  
  We highly recommend supports touching buildplate for this guy in order to support the bat wings during the build and give extra stability to the skeletal wings
Maximilian Schwarubich (verified owner) – March 19, 2021

i really have to say, that the pre supported file isnt very good… the supports are way too thick and i was not able to remove them without severely damaging the model itself. i ended up throwing it in the bin and supporting it myself to resin print. i assume they were auto generated?
- Nicholas Jebson (verified owner) – March 25, 2021
  
  Thank you for the feedback Max. We have only recently started pre-supporting our models and are possibly over-supporting them currently, though we are working on improving them. I will have another look at the Shadow Throne and see what improvements I can make today.