Isolation Bunker

$11.95

Any sales taxes will be calculated in the checkout.

Rated 4.00 out of 5 based on 2 customer ratings

The Isolation Bunker is a building designed for use in tabletop or role-playing games in a post apocalypse or sci-fi setting. Featuring hinged doors and removable roofs, it prints without supports.

Also included in this pack is a small printer version.

A small piece of filament or wire can be used as a hinge pin to attach the door to the doorway.

These models can be scaled to print for Gaslands at 70%.

This product is part of the Wasteworld Bundle

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

When the 5G chemtrails nuclear plague hit, Crazy Joe had hunkered down in his bunker isolated from the plague of humanity. He had stocked up on canned food, water and guns and was well protected from fallout or zombies with layer upon layer of scrounged junk and trash.

Update:

3 August 2020 (version1.1) Scale correction made to Roof-B.

Notes:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Product measurements can be found in the image gallery.
First Published version 1.0

Small Printer Reference

Additional information

Recommended Printer	FDM or resin printer
Infill	100% for resin printing, 10%
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Supports	requires supports for resin printing, Prints without Supports
Scale	28mm Wargames

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	35.7%
15mm Wargames	15	1:116	53.6%
HO Scale	20	1:87	71.4%
OO Scale	22	1:76	78.6%
28mm Wargames	28	1:62	100.0%
32mm Heroic & OpenLOCK	32	1:54	114.3%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

2 questions for Isolation Bunker

Rated 3 out of 5

ivan.antalec (verified owner) – June 23, 2022

corrugated sheet metal causes defects when printing without support. roof bridging is also bit problematic.
Rated 5 out of 5

Thomas Smith (verified owner) – March 26, 2026

Love this model. Takes a bit to support correctly, but worth it.
- Joanne Boorer – March 27, 2026
  
  Thanks for pointing this out. Can you please let me know what areas you needed support?