Tormented Scatter

$9.95

Any sales taxes will be calculated in the checkout.

This set contains twelve different scatter terrain piles, including: a body impaled on a spike, four plain rock piles, three piles of skulls, three rock piles with skulls and chains around them, and a pillar of skulls.

These are designed for use with the Caverns of Torment or Dark Caverns, but can be used to add drama to a variety of tabletop and role-playing games. They could also be used for providing cover or objectives in skirmish games.

This product is part of the Complete Demons

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

In the middle of the cavern stand some ominous-looking rock piles, of various sizes. Some are draped in yellowing skulls and rusty chain, while one has a decaying body skewered on it. At the far end of the cavern, the exit is blocked by a pillar of enormous skulls.

Updates:

20 November 2019 (version 1.1) Re-meshed some files that were causing issues in a commonly used slicer.

Notes for Tormented Scatter:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Product measurements can be found in the image gallery.

Additional information

Recommended Printer	FDM or resin printer
Terrain Tinker	Available
Infill	100% for resin printing, 10%
Layer Height	0.05 high quality on resin printers, .1 high quality
Supports	requires supports for resin printing, Prints without Supports
Scale	28mm Wargames

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	35.7%
15mm Wargames	15	1:116	53.6%
HO Scale	20	1:87	71.4%
OO Scale	22	1:76	78.6%
28mm Wargames	28	1:62	100.0%
32mm Heroic & OpenLOCK	32	1:54	114.3%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

Painting Guide: The Temple of the Damned

Posted on January 28, 2019July 24, 2025 by Matt

Below is a painting guide, explaining the steps taken to paint The Temple of the Damned. The model was initially primed with matt black primer. Bone This is the scheme used for the skulls, bone edging and teeth on the roof. Heavy dry-brush: Army Painter Leather Brown. Lighter dry-brush: Army Painter Barbarian Flesh. Wash:… Read more

3 Comments