Cart (0)

Product Categories+

Fastcallion Crawling

$9.95

Any sales taxes will be calculated in the checkout.

The Crawling Fastcallion is a massive creature with trees growing on it’s back shell.  Supports are required for printing this model and will require gluing during assembly. There is also a ‘baby’ Fastcallion suited to being printed in resin.

This product is delivered as a .ZIP file pack containing STL files for use on a home 3D Printer. The files are set to 28mm scale but can be rescaled before printing.

Description

Though known for hibernations below the mud that can last for months, eventually a Fastcallion must feed, look for mates or haul its bulky weight to the nesting grounds in the Gloaming swamps. When on the move, neither the forest nor the army can’t halt its lumbering progress.

Updates:

  • 22 August 2023 (version 1.2) Whole version now included.

Notes for Fastcallion Crawling STL:

  • Right-click on the image below and “Save As” to download the reference sheet for this pack
  • FDM version requires supports touching the buildplate.
  • Resin Pre-support version included.
  • Small Printer reference sheet included in the zip file.
  • Product measurements can be found in the image gallery.
  • First Published version 1.1

Fastcallion Crawling STL

Alternate Heads Reference

Fastcallion Crawling STL

Resin Version

Fastcallion Crawling STL

Additional information

Infill

100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength

Supports

Resin Pre-support included in the download., Supports touching buildplate

Layer Height

0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)

1 question for Fastcallion Crawling

  1. Jeremy (verified owner)

    Love this model. Not sure why you needed to cut it up in so many pieces. At 28mm its not huge. Understandably for the larger scale. Can I suggest including a complete model for those with larger print beds (with resin supports of course). Would fit easily on my Phrozen Mighty. I just put this together and seems like lots of time now needed for filling gaps. Still, love this little guy. Thank you.

    • Jo Boorer

      That’s a good idea.
      I have asked the modeler to do this for us.

Add a question

This site uses Akismet to reduce spam. Learn how your comment data is processed.

©2024 Printable Scenery. Website by Vienna & Bailey