Dice Tower Printable
Dice Tower Printable
Dice Tower Printable
Dice Tower Printable

Winterdale Dice Tower


The Winterdale Dice Tower is a modified version of the Winterdale War Tower, allowing you to place your dice in the top of the tower for them to come out via the door at ground level. It comes with an optional Dice catcher, which can be printed in parts for smaller printers.

The building is designed to be glued together.

This product is delivered as a .ZIP file pack containing STL files for use on a home 3D Printer. The files are set to 28mm scale but can be rescaled before printing.

Available: In stock
If you are a Kickstarter backer you must login to access your pledge



  • 15th  February 2018 –  1.1 The connecting nubs on the ground level and 2nd floor have been strengthened.
  • 20th March 2018 – 1.2 45 degree cuts were made in slope walls to spare filament.
  • 10th April 2018 – 1.4 Pegs strengthened on Dice-Tower-Ground-Floor-w-Tray-Part2-v1.1


  • Right-click on the image below and “Save As” to download the reference sheet for this pack.

Additional information



Layer Height

.2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)


Prints without Supports


  1. brian2

    What are the dimensions of this and does it print all in one piece or separate? Great job, looks amazing.

    • Matt Barker

      It will print as separate levels so that you can decide on the height, each section is 2 inches high

Add a Question