Homestead Roof

Author

Posts
- July 28, 2021 at 8:41 am #291155
  Brian Etty
  Participant
  I noticed when I load the Homestead Roof model in Prusa slicer it shows up canted and not flat. Was able to use the tool to place it flat but missed the first time I tried to print.
  Attachments:
  haggle-homestead.png
- July 28, 2021 at 9:24 am #291195
  
  Mike Los
  Participant
  
  Hey Brian,
  
  Thanks for showing us! A few others reported this and we’ve since updated the download with the new version that is adjusted to be flat on the base.
  
  Happy Printing 🙂
- July 28, 2021 at 10:15 am #291253
  
  farmerbil66
  Participant
  
  Thankyou for this, i was having a hell of a time trying to get this one underway
- July 28, 2021 at 11:42 am #291279
  
  Brian Etty
  Participant
  
  I learned from a previous file if looks funky on the bottom go back to the slicer and look at the first layer.
- July 28, 2021 at 9:14 pm #293032
  
  SuperJim
  Participant
  
  Was this fixed in v1.4? I downloaded before this thread, but don’t seem to have the issue.
- July 29, 2021 at 1:35 am #293066
  
  Brian Etty
  Participant
  
  Aye 1.4 if the fixed version.
- July 29, 2021 at 1:42 am #293068
  
  horaciorivas
  Participant
  
  same here! and thank you for the fix
- July 29, 2021 at 12:09 pm #293195
  
  Ddogwood
  Participant
  
  Thank you for the fix, this one was really confusing me…. everything else was printing fine, but I couldn’t get this one to work on two different printers using two different slicers…. now it appears to be working properly, and I learned another way a print can fail!
Author

Posts

Viewing 7 reply threads

The forum ‘Hagglethorn Hollow Kickstarter’ is closed to new topics and replies.

Attachments:

We use cookies