Cart (0)

Reply To: Dhow Overhang Issue

Home Forums Resolving 3D Printing Problems Dhow Overhang Issue Reply To: Dhow Overhang Issue

#158365
Avatarjason.surratt
Participant

Well silly me. The solution is in the description.

Supports need to be touching build plate when printing the stern.
Right-click on the image below and “Save As” to download the reference sheet for this pack.
Add supports touching build plates if you get too much stringing on the lower section of the hull or if using Cura select “make overhang printable”.

©2022 Printable Scenery. Website by Vienna & Bailey