Reply To: Profile for Prusa i3 Mk3 – Sli3er

March 20, 2019 at 5:06 am #141397

Gnomeinbrain

Participant

For Terrain I use the .15 Speed or the .2 quality profiles depending on the detail of the terrain. I lower the “other layers” setting to 200-210 depending on the type of filament. Also, lower the extrusion multiplier to .97 or .95 depending on filament.

For terrain I usually use Sunlu PLA. Sunlu prints well at 200 or 205 and .97.