Jetty

$11.95

Any sales taxes will be calculated in the checkout.

The Jetty is a multi-part FDM 3D printer model. It features 3 heights with stairs for models to cross between them. There is also an alternate bottom to the large piece with reinforced pylons covered in seaweed.

This model is part of the Cities of Ramshackle & Ruin Campaign

This product is part of the Ports of Ramshackle Bundle

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

Largely constructed from ships destroyed by pirates or the sea itself, these rustic jetties provide a serviceable track between the stone port side and the docked hulking cogs with their numerous cargos.

Notes for Jetty 3d Print File:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Recommend printing with raft on.
Important: This product is scaled to 32mm. To print it at 28mm to match the other 28mm terrain, scale it to 90%.
A small printer reference is included in the zip file.
FDM support file included.
Product measurements can be found in the image gallery.
First Published version 1.1

Jetty 3d Print File

Additional information

Recommended Printer	FDM or resin printer
Infill	100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Scale	32mm Heroic & OpenLOCK
Supports	requires supports for resin printing, Pre-Supported FDM supports provided, Print with raft, Prints without Supports

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	31.3%
15mm Wargames	15	1:116	46.9%
HO Scale	20	1:87	62.5%
OO Scale	22	1:76	68.8%
28mm Wargames	28	1:62	87.5%
32mm Heroic & OpenLOCK	32	1:54	100.0%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

Building a modular Ramshackle board for gaming

Posted on January 28, 2025July 23, 2025 by Sloane Dougherty

Warbands fight on cobblestone streets, ruins filled with danger and loot, and tall buildings for dramatic leaps of faith. These are all dream scenarios for fantasy wargamers and role-players. But having the right kind of board that enables this and gives you a different experience each time you play on it can take some work…. Read more

19 Comments

Comments

Shannon Moyers (verified owner) – September 30, 2025

I have had multiple print failures on the High Stand Opt. 1. This occurred over two printers and different infill percentages. The failures occur when the leg of the pier comes detached from the bed and it usually happens at the height of bump outs that support the platform planks. I have had success in printing all other models from this (including Opt. 2.) set. Do you have any suggestions? I have not had any bed adhesion issues with other models. My printers are leveled and I use hair spray on the bed. R/Shannon
- Joanne Boorer (verified owner) – October 1, 2025
  
  Hi Shannon. Are you printing with a raft or brim on? Can you please send a pic to [email protected] so we can see which leg you are referring to.
  As I see all of them are touching the buildplate.