My Account 
Description
A simple and accessible means for traversing the shark-infested waters between the shipwrecked shanties scattered about the port city. Still, one must brave them at their own risk for one snaped coil could send you plummeting to the rocks and waters below.
Notes for The Ramshackle Rope Bridges STL:
- Right-click on the image below and “Save As” to download the reference sheet for this pack.
- Important: This product is scaled to 32mm. To print it at 28mm to match other 28mm terrain, scale to 90%.
- A small printer reference is included in the download.
- The bent bridges will need FDM support to touching the build plate.
- Product measurements can be found in the image gallery.
- First Published version 1.1
Luke Everall (verified owner) –
Hi there. Previously I have heated and bent bridges to get a dip in the middle. You have thoughtfully presented pre-bent versions (I anticipate heating and bending the rope versions will be problematic).
My assumption is that the pre-bent files will require FDM supports, and a signpost message to that effect might help some users.
Great models, as always!
Joanne Boorer (verified owner) –
Hi Luke
Thanks for pointing this out.
I had stated both in the notes and Attributes that support would be required but I have now updated these to state FDM.