Description
Updates:
- 8 May 2018 – 1.0 Base of rocks connected together to enable easier printing.
Notes:
- Right-click on the image below and “Save As” to download the reference sheet for this pack.
$2.95
Hiding behind a ‘Rock’ is a great tactic often used to prevent oneself from being shot.
These ‘Stackable Rocks’ are all set to the same height so can be arranged in various ways to create … ‘Rocks’ of various sizes.
This product is delivered as a .ZIP file pack containing STL files for use on a home 3D Printer.
Updates:
Notes:
Infill | 20% |
---|---|
Supports | Prints without Supports |
Layer Height | .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended) |
Raft | Switch raft ON to help print bed adhesion |
You must be logged in to post a question.
Brandon Woodward (verified owner) –
What would you suggest as a brim size for this?
Printing rocks 02 and 03, first with no brim and all the outer column pieces fell during printing.
Printing again now with a 3mm brim which seemed to do well except for one piece on rock 02, one edge piece has fallen over mid print.
Trying to find a good middle ground of brim size and using least material possible.
Matt Barker –
If you use a raft it will help with bed adhesion