Proud sons of Odin crewed these sturdy vessels using them to travel to far distant shores, to either raid or trade with those who dwelt there.
The 28mm scale Viking Longship can be printed as a complete model, or it can be printed in 3 separate sections. It’s designed to fit 28mm models inside.
You will need to print it with supports touching build plate switched on, because of the angle of the ‘Garboard Strake’ is very steep. The anchor must be printed with supports touching build plate.
Using the guide holes and spare filament you can secure the levels of the building in place. Our guide on how to do this can be found here.