Sale!
Sale!
Sale!
Sale!
Sale!
Sale!

Citadel Bundle

$139.15 $84.95

This is the Citadel Bundle that contains

  • Winterdale Citadel Towers
  • Winterdale Citadel Wall
  • Winterdale War Tower
  • Winterdale Gatehouse
  • The Stables
  • Castle Gate
  • Wartower Stairs and Cross Bridge
  • Winterdale Bend Wall
  • Citadel Balcony and Spikes
  • Winterdale Citadel Bridge
  • Winterdale Drawbridge
  • Winterdale Crenelation
  • Winterdale in Ruins
  • The Barbican
  • Barbican Hoarding
  • Winterdale Castle Side Stairs
  • Winterdale Bridge

You can see our other Bundles here

The Bundles are a Limited time offer

Available: In stock

1 x Winterdale Citadel Towers

Winterdale's Towers rise like severe, grey stone fingers into the cold sky.  Tall, proud and sturdy it is these towers from which the Winterdale Guard keep watch over the land, and so warn the city of any encroaching danger. The Winterdale tower set allows for the printing out of a modular castle tower, with two options for the tower's turret, the ability to print out multiple floors of the tower allowing for the height of the building to be fully customized. In addition, the tower comes with a plinth, that allows it to be lined up neatly with the Winterdale wall and tower bridge sets. A set of steps gives access to the tower's door when raised on this plinth.

Ideally suited for Fantasy Wargames, such as Age of Sigmar, Frostgrave or Kings of War.

This product is delivered as a .ZIP file pack containing STL files for use on a home 3d Printer. The files are set to 28mm scale but can be rescaled before printing

In stock

1 x Winterdale Citadel Wall

This is the castle wall and balustrade section and is compatible with all the citadel towers.

Prints without supports

Includes option without skulls

Includes option to print as two pieces

Also includes the vertical wall extension The Winterdale buildings are designed to be glued and placed together. This product is delivered as a .ZIP file pack containing STL files for use on a home 3d Printer. The files are set to 28mm scale but can be rescaled before printing

In stock

1 x Winterdale War Tower

The War Tower is a set of modular sections that can construct a medieval fortified tower of any height.

Interiors have been re-modeled

Comes with a rocky base to stand on its own.

There is a removable door option

Prints without supports

now includes 2 door mid section

The Winterdale buildings are designed to be glued and placed together.

This product is delivered as a .ZIP file pack containing STL files for use on a home 3d Printer. The files are set to 28mm scale but can be rescaled before printing

In stock

1 x Winterdale Gatehouse

This is the Winterdale Gatehouse and is compatible with all the citadel towers and walls.

Prints without supports

Includes options to print as smaller pieces

The Winterdale buildings are designed to be glued and placed together.

  Save Save This product is delivered as a .ZIP file pack containing STL files for use on a home 3d Printer. The files are set to 28mm scale but can be rescaled before printing

In stock

1 x The Stables

The 3D Printable Stables is a modular system that will allow you to build a variety of stables and outhouses, you can attach them to the sides of buildings or create a standalone structure. Save Save Save Save This product will be delivered as a .ZIP file pack containing STL files for use on a home 3d Printer. The files are set to 28mm scale but can be rescaled before printing

In stock
The Gate

1 x Castle Gate

The gate comes complete with lifting portcullis and drawbridge. This model has been designed to be compatible with the gate and hoarding You will need to attach string or a small chain to each side of the drawbridge and thread it through the gate The Winterdale buildings are designed to be glued and placed together. This product is delivered as a .ZIP file pack containing STL files for use on a home 3d Printer. The files are set to 28mm scale but can be rescaled before printing

In stock
Wartower Stairs and croos Bridge - BETA

1 x Wartower Stairs and Cross Bridge

THIS IS AN ADD-ON FOR THE WARTOWER

Wartower stairs and cross bridge

This includes an option with the stairs built into the wartower section

This product is delivered as a .ZIP file pack containing STL files for use on a home 3d Printer. The files are set to 28mm scale but can be rescaled before printing

In stock

1 x Winterdale Bend Wall

This is the castle wall and balustrade curve section and is compatible with all the citadel towers.

Prints without supports

Includes option without skulls

Includes option to print as two pieces

Includes the wall extension piece

The Winterdale buildings are designed to be glued and placed together.

  This product is delivered as a .ZIP file pack containing STL files for use on a home 3d Printer. The files are set to 28mm scale but can be rescaled before printing

In stock
Citadel balcony attachment

1 x Citadel balcony attachment - Spikes

Winterdale Spike balcony.

This is an add-on only for the Winterdale Citadel Towers.

The Winterdale buildings are designed to be glued and placed together.

This product is delivered as a .ZIP file pack containing STL files for use on a home 3d Printer. The files are set to 28mm scale but can be rescaled before printing

In stock

1 x Winterdale Citadel Bridge

The city of Winterdale, a stolid, well-guarded momument to civilization, located far in the northern tundra. As the last city before the bleak wastes of the polar desert, it serves as a bastion in a cold, grey world.

Much like the land it inhabits, the walls, defenses and buildings of the city are all made of solid, unyielding grey stone. It is by using such material as the foundation of the city, that has allowed Winterdale to remain a proud beacon of civilization, in a savage land.

This is the castle wall and balustrade bridge section and is compatible with all Winterdale citadel towers.

Prints without supports

Includes option without skulls

Includes option to print as two pieces

The Winterdale buildings are designed to be glued and placed together.

This product is delivered as a .ZIP file pack containing STL files for use on a home 3d Printer. The files are set to 28mm scale but can be rescaled before printing

In stock

1 x Winterdale Drawbridge

The city of Winterdale, a stolid, well-guarded momument to civilization, located far in the northern tundra. As the last city before the bleak wastes of the polar desert, it serves as a bastion in a cold, grey world. Much like the land it inhabits, the walls, defenses and buildings of the city are all made of solid, unyielding grey stone. It is by using such material as the foundation of the city, that has allowed Winterdale to remain a proud beacon of civilization, in a savage land.

The Castle Drawbridge is an add-on for the castle gate.

There is a fixed version and 'lift-up' version.

Prints without supports

The Winterdale buildings are designed to be glued and placed together.

This product is delivered as a .ZIP file pack containing STL files for use on a home 3d Printer. The files are set to 28mm scale but can be rescaled before printing

In stock
Winterdale Crenellation

1 x Winterdale Crenelation

The city of Winterdale, a stolid, well-guarded momument to civilization, located far in the northern tundra. As the last city before the bleak wastes of the polar desert, it serves as a bastion in a cold, grey world. Much like the land it inhabits, the walls, defenses and buildings of the city are all made of solid, unyielding grey stone. It is by using such material as the foundation of the city, that has allowed Winterdale to remain a proud beacon of civilization, in a savage land. The Winterdale Crenelation set is compatible with the Winterdale Citadel Towers and Wall sets.

Prints without supports

The Winterdale buildings are designed to be glued and placed together.

This product is delivered as a .ZIP file pack containing STL files for use on a home 3d Printer. The files are set to 28mm scale but can be rescaled before printing

In stock
3d Printable Castle Ruins

1 x Winterdale in Ruins

The Winterdale Citadel Ruins is an add-on for the Winterdale Citadel This will allow you to create a wide variety of ruined towers and walls. All 3 Crenelation options are also included The Winterdale buildings are designed to be glued and placed together. This product is delivered as a .ZIP file pack containing STL files for use on a home 3d Printer. The files are set to 28mm scale but can be rescaled before printing

In stock
The Barbican

1 x The Barbican

The Barbican is a multi part model designed to be compatible with the 2" (50mm) building system If you want to use the Winterdale citadel walls for the barbican you can scale them down to 50x150mm for printing This model is designed to also work with the gate and hoarding This is a huge file pack and also contains the barbican bridge sections, the cobblestones and the road section. (378MB) The Winterdale buildings are designed to be glued and placed together. This product is delivered as a .ZIP file pack containing STL files for use on a home 3d Printer. The files are set to 28mm scale but can be rescaled before printing

In stock
Castle Hoarding

1 x Barbican Hoarding

The Castle hoarding is a multi part system. Each part is based on the 2 inch modular building system so it is compatible with other products. If you want to use the original winterdale walls instead on the barbican walls, just re scale them to 6 inch by 2 inch by 2 inch Also contains the hoarding tower as 1 piece. The Winterdale buildings are designed to be glued and placed together. This product is delivered as a .ZIP file pack containing STL files for use on a home 3d Printer. The files are set to 28mm scale but can be rescaled before printing

In stock
Winterdale Castle Side Stairs

1 x Winterdale Castle Side Stairs

This is the Winterdale Castle side Stairs which is compatible with all the citadel towers and walls.

Prints without supports

Includes option without skulls

Includes option to print as two pieces

If you want these to work with the wall you will also need the Crenelation Options

The Winterdale buildings are designed to be glued and placed together.

Save This product is delivered as a .ZIP file pack containing STL files for use on a home 3d Printer. The files are set to 28mm scale but can be rescaled before printing

In stock
Winterdale Bridge 5.1

1 x Winterdale Bridge

The land around Winterdale is broken up by streams, rivers and small chasms.  To make passage to the city as easy possible, Winterdale has sent out its builders the worst of these gulfs, to bridge them with sturdy constructs of wood and metal. The Winterdale Bridge is a modular piece of wargame terrain. The bridge's length is entirely customisable , allowing you make the bridge as long, or short, as you wish. In addition, you can re-scale the bottom supports to match the chasm or use the ramps to cross a flat surface. As the Winterdale bridge is pre-OpenLOCK, all the components must be glued together. Ideal for Fantasy or Historic Wargames, such as Frostgrave or Kings of War Historical, or RPGs, Like D and D 5th edition. This product is delivered as a .ZIP file pack containing STL files for use on a home 3d Printer. The files are set to 28mm scale but can be rescaled before printing.

In stock