Description
Notes:
- To upscale to 28mm increase size by 1.3.
- Right-click on the image below and “Save As” to download the reference sheet for this pack.
$4.95
Intact buildings were a rare sight in Stalingrad, the furious fighting leaving every structure damaged in some manner.
The Stalingrad Ruins 2.0 pack contains a set of pre-configured Stalingrad ruins, which are designed to be printed in three sections.
The Stalingrad Ruins 2.0 set is designed to fit in with the Stalingrad Ruin sets A, B, C ,D, E and F. The scale is set to 15mm for games such as Flames of War. However, they can be re-scaled to 28mm to be used with games like Bolt Action.
This product is delivered as a .ZIP file pack containing STL files for use on a home 3D Printer.
Notes:
You must be logged in to post a question.
Barrie MacDonald –
Hi Matt
Are the 15mm Stalingrad Buildings capable of being upscaled to 28mm? I appreciate some slicing might be needed, or is it in the “to Do” list to make 28mm versions and some stage.
Cheers Barrie
Matthew Barker –
You can scale them up but you will need to cut them into smaller pieces before printing. This is on our to-do list.
However, you can also do this yourself in meshmixer is you need it right at the moment
lazette2011 –
At 15mm scale, what are the overall dimensions of the printed piece? Thanks!
Matt Barker –
I have updated the product images to show the sizes of the prints
dale –
Will they scale down to 6mm.
Sam Campbell –
They will scale down to 6mm, you will need a small nozzle and print at finer resolution to get good prints.