Shop

Rampage Extended Stone Floors

$4.95

The Extended Stone Floor set contains extra Rampage Stone Floor tiles, as well as a 6×6 variant.

Please download the base file set to get the OpenLOCK Clip.

This product is delivered as a .ZIP file pack containing STL files for use on a home 3D Printer. The files are set to 28mm scale but can be rescaled before printing.

 

Available: In stock
If you are a Kickstarter backer you must login to access your pledge

Description

Updates:

  • 1.1 Includes an NA and SC tile. The NA and SC have the ports positioned on the opposite sides allowing you to connect an EB to an E, or an UB to a U.

Notes:

  • Rampage is a modular interconnecting scenery building system that allows you to build everything from perfect dungeon tiles, to large buildings and fortifications. Each tile costs less than 50 cents to print on any 3D printer.
  • Rampage uses ‘OpenLOCK’ locking clips to attach the walls to floors so you can mix and match to make amazing combinations. The walls tessellate perfectly allowing you to make true form tiles, rooms and buildings.
  • Please also get the locking clips from the base pack here.
  • Right-click on the image below and “Save As” to download the reference sheet for this pack.

Additional information

File Type

STL files in ZIP folder

Infill

10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength

Layer Height

.2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)

Print Volume

100mm x 100mm x 100mm print build volume required

Supports

Prints without Supports

Q&A

  1. Mitch Cowan

    The circular ruins pictures appears to have a second level. Is that connected by some method securely so it won’t silde off or is it just placed atop the 1st level? If there’s a secure means to mount the second tier, what is it? I can’t find anything obvious in the files. Thanks

    • Matthew Barker

      The Rampage heavy walls have no top connector, the top connector will be part of a new set of walls that will connect with all the existing walls.

  2. w.stephen.lewis (verified owner)

    What is the difference between the 6×6 and the 6x6B? Is there some place I haven’t found yet on the site explaining the lettering differences?

    Thanks!

    • Matt Barker

      The B version has the OpenLOCK ports in the alternate location (this was required before Triplex). All the floors are all getting up-graded to OpenLOCK ‘triplex’. They are backwards compatible. These templates will give you a guide as to what’s available https://www.printablescenery.com/product/open-lock

  3. taylor.hughlett (verified owner)

    Do these use the same clips as in the base pack? I removed the supports at the front of the openlock ports, but I cannot get the lock into the port for the life of me. Is there something I’m missing here?

    • Matt Barker

      Yes they use the same clips. Can you please check that you are using the latest clip from the basepack ?

Add a Question