Description
Although the allure of treasure is high, the deeper you work your way into the crypts, the more you wonder whether you should be here at all. Everything here seems to be dead. Well, apart from the things that apparently want YOU to be dead.
Updates:
- 20 June 2017 (version 1.8) Small mesh repair to AB-RPG-CryptWallLow-V1.8, ED-RPG-CryptTomb-V1.7, SB-RPG-CryptFloor-V1.7.
- 10 October 2017 (version 1.9) Minor mesh repair to Tomb tiles to resolve an issue with some slicers.
- 4 May 2018 (version 2.1) Updated to Triplex
- 11 February 2020 (version 2.2) The Brazier now has a two part option.
- 1 July 2021 (version 2.3) R-TRPplus-CryptTomb and S-TRP-Crypt-Tomb had fixes made to detailing attachments.
- 24 August 2022 (version 2.4) Now contains a the E-F-A-TRP-Crypt-Floor-v2.0 which is a combination of the F-A tile and E tile that was requested.
Notes:
- Right-click on the image below and “Save As” to download the reference sheet for this pack.
- Product measurements can be found in the image gallery.
jonathan.weismann (verified owner) –
Will these tile sets be updated to the latest openlock standard to have 3 different openlock locations along all 4 sides of the base?
Matt Barker –
Yes we will be updating the crypt floors, It’s on our to do list
cabounds –
“Yes we will be updating the crypt floors, It’s on our to do list”….
Has this been completed? My 4×4 extended floors have 4 connections on each side not 3 as in this photo. Need to know before I buy.
Matt Barker –
I have brought the crypt floors to the top of the update list
John Ware (verified owner) –
Hi Matt and team, I know you’re busy with the KS projects, I was wondering if the crypt floors might get some attention, would be great to update these to triplex, and have a few more floor shapes, Thanks.
Jo Boorer –
The Crypt Floors and Risers have just been updated to Triplex
josh1 (verified owner) –
I’m having trouble figuring out which set the curved stone wall is from, in the first photo on this product. It’s the curved crypt riser, attached to a curved stone wall – which wall is that? Thanks!
Sam Campbell –
Ramapage Heavy Wall G Tile from https://www.printablescenery.com/product/rampage-heavy-walls/
Alexander (verified owner) –
Hey guys,
First: I really love your work. Especially the crypt tiles. Unfortunately one thing bothers me: The brazier on top of the EC tile. Is there a chance that you could offer the parts separately?
As I said at the beginning: great work. Looking forward to everything that will come in the future. 🙂
Nicholas Jebson –
Hey Alexander
We are looking at getting that updated, thank you for the suggestion.
Nick
MJJEPPER (verified owner) –
Hey guys, the S-TRP-Crypt-Tomb has a few model issues the cause failures. First, one of the crosses (corner panel) has a half sphere that is not adjoined to the wall. Second, one of the decorative little x’s attached to the arch on the one inch side is not attached to the wall. These two parts never print correctly on resin. Mind updating so that it is printable?
Nicholas Jebson –
Interesting. Obviously we made it well before resin was a thing and it never seemed to effect the FDM prints. We will get it looked at and updated.
aylizia (verified owner) –
I love this set, and I know it’s an older one but is there any chance for a addition to it at some point?
I was making a room with a circle floor design in the middle using the half circle pieces but there is no piece that can square it out again so it can connect to the other square floor tiles like W does in this set (https://www.printablescenery.com/product/rampage-stone-floors). I have that other set but it’s not really working with the design of this one sadly.
Mike –
Hi Aylizia,
Thanks for your suggestion, it is certainly something we will look at adding when this set comes up for an upgrade.
It is likely that it will come through on TerrainTinker (which is great fun using OpenLOCK tiles if you haven’t tried it yet) but you will receive an email when the product does get updated.
Thanks!