Cart (0)

Product Categories+

Products by Game Type

Product Categories+

OpenLOCK Magnetic

FREE

“What could possibly be better than an OpenLOCK clip? Why, a magnetic OpenLOCK clip, of course!”

The OpenLOCK Magnetic is an OpenLOCK magnetic adapter clip. It is interchangeable with other OpenLOCK clips, but is cut in half with two holes for magnets to be inserted.

The two holes are designed to use 3mm x 4mm barrel magnets (1/8” x 1/8” will work too).

This product is compatible with all OpenLOCK tiles.

If you are a Kickstarter backer you must login to access your pledge

This product is delivered as a .ZIP file pack containing STL files for use on a home 3D Printer. The files are set to 28mm scale but can be rescaled before printing.

Description

Notes:

Below are links to where you can purchase the barrel magnets.

Q & A

  1. Avatar

    Nathan Turner (verified owner)

    Note: Aussie Magnets is 1/3rd cheaper for a batch of 100 magnets than magnet.com.au, and I’ve always found them to be fast shipping & great quality. https://aussiemagnets.com.au/product/–3-x—4mm-Rod-%28Rare-Earth%29–%28Pack-of-100%29.html

    • Avatar

      Rex Foot

      Good suggestion, i had added it to the list in the notes.

  2. Avatar

    Josephscalet (verified owner)

    I really like this design and I am going to make a bunch up once I get some magnets, however I was just curious why you went with 4mm deep slots as opposed to like 1 or 2 mm deep slots?

    Thank you

    • Sam Campbell

      Sam Campbell

      You can use magnets up to 4mm thick, these offer the best connection.

  3. Avatar

    Ryan Fitch (verified owner)

    Any chance of getting a sphere magnet clips similar to what infinitylock did?

    https://3dgeeks.2b.work/pages/view-thing.html?id=3101091

    • Sam Campbell

      Sam Campbell

      We can add this to the suggestion list for development queue.

  4. Avatar

    arthur.lawry

    How do you use these on standalone columns at wall junctions since you can’t fill both sides of a port? I imagine I could cut down a clip and glue it in place, or just use walls with connected columns/longer walls, but it seems like there would be no way to make sure your columns work in every configuration with just one clip per port

    • Sam Campbell

      Sam Campbell

      The columns can only ever have 2 clips inserted from any direction. An alternative would be to print with magnetic clips in the print or cut and glue them afterwards.

  5. Avatar

    vanerie (verified owner)

    Where did you find the 3 mm drill bit vise (the orange thing) ?

    • Sam Campbell

      Sam Campbell

      These you can usually get from your local hobby shop.

Add a question

This site uses Akismet to reduce spam. Learn how your comment data is processed.

©2019 Printable Scenery. Website by Vienna & Bailey