My Account 
Description
For many years, this magnificent building has housed not only the training school for the finest ships’ navigators, but also the meeting place for the more progressive alchemists. The sheer pace of scientific advance within the guild has long been a cause for concern for the religious temples and the Mages’ Guild.
Updates:
- 19 November 2019 (version 1.1) Solid options added.
Notes:
- Right-click on the image below and “Save As” to download the reference sheet for this pack.
- Product measurements can be found in the image gallery.
Reference sheet for medium printers
Reference sheet for small printers
Reference Sheet for Solid
Sakura.j.lim (verified owner) –
i wanted to confirm that this is 28mm scaled as i just printed up lvl 1 pt 2 and it looks a fair bit smaller than all other 28mm scale buildings i have done from you guys. i have not printed the rest yet in case this was incorrect.
Sam Campbell (verified owner) –
This is scaled for 28mm and is a smaller building than the others, the level heights are the same as the other buildings.
Christian Olesen (verified owner) –
Question: How do you mount the astrolabia to the tower. Is it just by eye and glue or do it have specific grooves that im not aware of?
Btw, its hella cool, just printed it and it looks awesome.
Matt Barker –
You can glue the astrolabia by eye. We did not want to make grooves for the alignment because we wanted the Astrolabia to be optional
timlaugh –
For part NavigatorsGuild-Tower-v1.0.stl , does it require any support for printing the the top floor ?
Matt Barker –
No, it should be fine. however, if you worried that your printer wont handle overhangs then you can switch ‘supports touching buildplate’ to on
Mark Smith –
Are the different rooms separated by doors? I need a lighthouse that has a building with at least two separate rooms in the ground building and I think this will be perfect.
Jo Boorer (verified owner) –
There is not a door between the two rooms on Level one of this model