Description
Sometimes, no matter how sacred or beautiful a building, churches became the victims of shells and bombs.
Updates:
- 12 June 2017 (version 1.3) Small mesh repair to Church-Ruin-Back-Roof-v1.3, Church-Ruin-Mid-A-Roof-v1.3, Church-Ruin-Mid-B-Roof-v1.3, Church-Ruin-Mid-B-v1.3, Church-Ruin-Tower-B-v1.3, Church-Ruin-Tower-C-v1.3.
- 17 July 2018 (version 1.5) Church Decor added
- 29 March 2019 (version 1.7) Locking pins have been added and filament door connection.
Notes:
- Right Click and “Save As” to download the reference sheet below.
- To make the hinges, use a small piece of unused filament. You can refer to this video for instructions.
Church Decor Reference
Nick Simmerson (verified owner) –
Tiled floor pattern won’t print at 0.2 layer height, do we have to print at 0.1 to get all the detail?
Matt Barker –
Yes, it will only show .1 as they pattern is very fine. I should have made it .1mm deeper. I’ll add it to the fixes
Anton –
Hi,
I was wondering, how big is the church, fully assembled? Love the model, but like to know the full measurements before buying. Thanks!
Rex Foot (verified owner) –
It is about 40cm long by 11cm wide, but if you want it to be a centerpiece for Bolt Action it will probably need to be upscaled slightly.
jasper (verified owner) –
what is the best way to Assembel this kit ?
i am half way printing looks real nice
Jo Boorer (verified owner) –
Refer to Pic in gallery.
jasper (verified owner) –
how much upscaling for bolt action.
printend 1 on 100% and its a little to small i think
Sam Campbell –
Print at 110-120% for Bolt Action. It will be big though. You can use Sid for size comparison before you print. He’s free to download from here: https://www.printablescenery.com/product/sid-scale-25mm/
werner0nortje –
Is the model as is when bought the correct size for B.A
Sam Campbell –
Yes this is scaled for 28mm.
werner0nortje –
What is the total gm useage to print the complete church
Sam Campbell –
About 700gms at 10% infill.
werner0nortje –
Thank you Sam. What is the complete print time on the model on 10% infill.
Sam Campbell –
It’s about 5-6 days worth of printing.
jonnydw –
What scale is the church/ruined church?
Nicholas Jebson –
28mm in its base set-up, though if you want it for 15mm you just have to scale the model down in the slicer to 60%.
CristianSCooney –
The “undestroyed” church has an optional back wall to make it shorter … does this destroyed version have the same option so the building can be swapped out when damaged?
Mike (Printable Scenery) –
The midsection of this one is open if you don’t stick on the end, so it would work as a ruined version of the shorter church, though you might want to add some extra rubble so its not an entire open wall.