Name: Lost Library of Ithillia
Brand: Age of Sigmar
Availability: InStock

Description

Battered by the elements and barely recognizable, the tomes of Elven lore lay scattered amid the crumbled bricks and snapped timbers. Trees and shrubs emerge from the steps, and small animals build their homes in the gaps on the rickety shelves. Yet under all the twisted vines and overgrowth, traces of the intricate craftwork and elegant curves of the building remain.

Updates:

30 September 2019 (version 1.2) Correction made to level 2 arch.
11 February 2020 (version 1.3) Alternate cut configuration made of the Lost Library to allow for easier printing.
31 July 2020 (version 1.4) LostLibrary-Ithillia-Lv1-Pt1-v1.2 has had a height adjustment. LostLibrary-Ithillia-Lv1-Pt2and3-v1.1 combined option added. This part will still require support turned on. LostLibrary-Ithillia-Lv1-Pt4-v1.2 and LostLibrary-Ithillia-Lv1-Pt5-v1.2 have had manifold fixes.

Notes for Lost Library of Ithillia STL :

Reference sheet for the small printer option is included in the zip file.
Right-click on the image below and “Save As” to download the reference sheet for this pack.
Product measurements can be found in the image gallery.

Lost Library of Ithillia STL

Additional information

Infill	10%
Layer Height	.2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Supports	Prints without Supports

3 questions for Lost Library of Ithillia

heishi8011 (verified owner) – September 30, 2019

Could you make a un-splited version of Lv1 model for our large print bed printer?
- Sam Campbell (verified owner) – October 2, 2019
  
  I’ll add it to suggestion list.
loy (verified owner) – December 26, 2019

I’ll second the above request. I would like it in 1 piece as well.
donald.plummer (verified owner) – May 2, 2020

Some feedback on this model:

Pt1’s 210.12mm is 0.12mm too tall for the Prusa i3. I’m guessing that extra 0.12mm is unnecessary. Using the “Cut” function in prusa slicer I got it to fit.

Pt2’s hanging staircase needs supports. Instead, merge Pt2 and Pt3, now no supports are necessary for the staircase. Still fits on the printer. I merged with Meshmixer so there wouldn’t be a seam.

There are little curled cornices at the top of the walls that require supports. It appears to me that these are the only features requiring supports. Would have been nice if the entire building was supportless.
- Sam Campbell (verified owner) – May 5, 2020
  
  This has been added to get updated.