Shop

Industrial Walkways Printable
Industrial Walkways Printable

Industrial Walkway Ladders and Blast Shields

$9.95

The Industrial Walkways file pack contains the Blast Shields, Ladders and Bridge Supports and three bonus E tiles. You can use these to build a variety Sci-Fi Walkways. The Blast Shields will fit on the side of any OpenLOCK Floor

You will also need an OpenLOCK Floor for this setup, like the OpenLOCK Gothic Sci-Fi Floors

Download the Rampage Base Pack for free to get the latest version of the OpenLOCK clip.

This product is delivered as a .ZIP file pack containing STL files for use on a home 3d Printer. The files are set to 28mm scale but can be rescaled before printing

Save

Save

Save

Available: In stock
If you are a Kickstarter backer you must login to access your pledge

Description

NOTE, You will also need the Gothic Floors if you want to make the model as shown in the example :www.printablescenery.com/product/gothic-sci-fi-floors

UPDATE:

  • 28th November 2017-1.1 A-Ladder-Scifi-Long-v1.1 has been set to zero as it could confuse some slicers.

 

 

 

 

 

Save

Save

Save

Save

Additional information

Infill

20%

Supports

Prints without Supports

Layer Height

.2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)

Q&A

  1. tikigod1080 (verified owner)

    Does everything just sit on top of the bridge supports? The bridge supports have bumps on top to keep things from sliding but that doesn’t seem very secure when compared to all of the pieces that lock together. It seems like it would be difficult to set up or move if they don’t actually attach.

    • Matt Barker

      Yes, they just sit on top of the Supports. One option is to glue an E tile to the top of the Bridge Support. That way you can have sturdy bridges that are fully modular.

  2. wingsofchronus (verified owner)

    Hi. Any chance you could make some short supports and ladders at 3″ in height and the long ladders and tall supports 6″ in height? Providing these would help unify the heights when playing with other scenery with these dimensions (i.e. each level is 3″ tall). Thanks!

    • Matt Barker

      Hi, yes we could do that no problem. Is the total height your looking for = 3″ and 6″ including the platform?

  3. J.p. Brichta (verified owner)

    Hi, can you explain how piece EH is supposed to connect with other OpenLock bits? The connector is right at the bottom and the pieces don’t match up properly.

    • Matt Barker

      They are designed to work with OpenLOCK 2″ face like the E tile. They can be used as the sides to a bridge or raised platform. They are supposed to look like they sitting up off the ground. The inside partt of the blast wall will look good with the industrial floors.

  4. jasharen (verified owner)

    In the picture there are corner pieces to connect with G-railing, but in the actual package this piece is missing. Is that part of another package?

Add a Question