Cart (0)

Product Categories+

Products by Game Type

Product Categories+

French House – Shop

$9.95

Quaint, brick walled and red roofed shops were a common sight throughout French villages in the early 1900s, with many still standing to this day.

The French House-Shop is a multi level 3D printed building. The building is 150mm x 100mm and each level is 50mm high. The set can be printed in three levels, Ground Floor, Second Floor and Roof. Or you can print those levels in two separate parts. This pack is the non ruined version of the French House-Shop Ruins pack.

 

If you are a Kickstarter backer you must login to access your pledge

This product is delivered as a .ZIP file pack containing STL files for use on a home 3D Printer. The files are set to 28mm scale but can be rescaled before printing.

Description

Updates:

  • 5.1  Guide holes have been added.
  • 28 January 2019- 1.1 Locking pins have been added.
  • 29 January 2019 – 1.2 Legacy folder added.
  • 6 June 2019 – 1.3 Windows and Stair rails have been made thicker.

Notes:

  • Right-click on the image below and “Save As” to download the reference sheet for this pack.
  • Reference for the small printer is included in the zip file.
  • Split sections of all levels of the building are available for use with smaller printers.

Additional information

Infill

20%

Layer Height

.2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)

Supports

Prints without Supports

Dimensions

Dimensions and weights are available in the image gallery

Q & A

  1. Avatar

    Matthew Barker

    Its OK to ask questions here 🙂

  2. Avatar

    Christoph Loewe (verified owner)

    Hi,
    just noticed that House-shop X2 and House-shop X3 are the same files …
    So another part of lvl1 is missing in the cutted version.

    Chris.

    • Avatar

      Matthew Barker

      Thanks for spotting that Christoph, I have updated the file pack and added the missing piece

  3. Avatar

    Nigel Guest

    Matt is this set at 15mm?

  4. Avatar

    Matthew Barker (verified owner)

    This is set to 28mm, scale to 60% and it will be 15mm (perfect for Flames of War)

  5. Avatar

    G Rose

    Hi, are there any openlock bases for these houses including the ruined version (shop, town,farmhouse) at 15mm to go with the openlock hex roads?

    • Avatar

      Matthew Barker (verified owner)

      Not yet, we could look at them in the next Kickstarter

Add a question

This site uses Akismet to reduce spam. Learn how your comment data is processed.

©2019 Printable Scenery. Website by Vienna & Bailey