My Account 
Description
“Sir, what’s that noise I hear from the stair well? Oh no, it’s those gigantic cubes again! Where do they keep coming from? Run!”
Updates:
- 15 February 2018 (version 1.1) The connecting nubs on the ground level and second floor have been strengthened.
- 20 March 2018 (version 1.2) 45-degree cuts were made in slope walls to spare filament.
- 10 April 2018 (version 1.4) Pins strengthened on Dice-Tower-Ground-Floor-w-Tray-Part2-v1.1
- 17 August 2018 (version 1.5) Small Printer option added.
- 7 September 2018 (version 1.6) Size adjustment made to Hatchway Door.
- 7 January 2020 (version 1.7) Pins have been adjusted on the Dice-Tower-Ground-Floor-v1.1 & Dice-Tower-Ground-Floor-w-Tray-v2.1
Notes:
- Right-click on the image below and “Save As” to download the reference sheet for this pack.
- Product measurements can be found in the image gallery.
Reference for Small Printer
brian2 –
What are the dimensions of this and does it print all in one piece or separate? Great job, looks amazing.
Matt Barker –
It will print as separate levels so that you can decide on the height, each section is 2 inches high
eznieh –
Atm im waiting for my printer with a printbed of 115mm *65mm *165mm
Would i be able to print the tower?
i’m having a hard time finding the exact measurements
Sam Campbell –
There are measurements in the gallery pictures. Based on your printer size you would need to cut it using this guide https://blog.prusaprinters.org/cut-stl-models-3d-printing-meshmixer/
William Rick (verified owner) –
L1 has recesses for the ground floor prongs. L2 and L3 don’t have recesses and just sit there loose. What am I missing?
Nicholas Jebson –
L2 and L3 are designed so that the prongs sit just in front of the ramp of the piece above it. due to the shape of the tower and placement of the ramp this should hold things together with minimal shaking
William Rick (verified owner) –
Thank you!
Followup: Is there a change log explaining what changed when (for example) this dice tower went from 1.6 to 1.7?
Nicholas Jebson –
There is a change-log in the description of each product, usually just above the images of the complete set if you scroll down a little bit.
Mark Bostic (verified owner) –
I am printing the ground floor and tray as the 5 parts, are they to be glued together? If so what is the purpose of the cutouts along the joining sides?