Model Updates

Model updates and revisions

Read through the changelog of Winterdale 2 Updates. Changes are ongoing so make sure to check back to see what’s new.

Citadel Tower 5.2

  • All tower sections to be the same relative scale and fit 50mm dungeon tile inside
  • All the floors are now the same standard size for each section (50 mm) tile
  • double door version, door in each side and door opposite
  • ‘Boolean’ the bottom of all turrets

Citadel Gatehouse 5.3

  • Option to print 1 side at a time for smaller printers
  • Includes the Spike Battlement
  • 27 April 2017 – 5.3 Includes solid Gatehouses
  • 25 July 2017 – 5.4 Contains Castlegate-Peg-03 and has had Small mesh repairs done to WinterdaleCitadel Gate 5.1 D-R, WinterdaleCitadel_Gate_5.1_C,WinterdaleCitadel_Gate_5.1_D.

Citadel Walls 5.2

  •  All wall sections and battlement options re-scaled to match
  • Simplify the geometry on battlement floor, failing on some printers
  • 27 April 2017 – 5.2 Includes solid Citadel Walls

War Tower Stairs & Cross Bridge 5.0

  • New tower section that includes stairs and balcony

War Tower

  • 5.1 Tower base now has split options
  • 5.2 Floors now load perfectly flat to print bed
  • 5.3 Includes 2 door section
  • 21 April 2017 – 5.4 Contains the solid version of the Tower
  • 17 July 2017 – 5.5 Contains extra options,  WarTower-Turret-L03_No_Window, WarTower-Turret-L03_One_Window, WarTower-Turret-L03_Two_Window

Bridge Cottage 5.3

  • Files updated to include new easy to print roof
  • 5.3 Ladder has been added to the pack.
  • 5th September 2017- 5.4 Repaired Cottage-Roofv02B-Solid-PART1-v2.1, Cottage-Roofv02B-Solid-PART2-v2.1

Tavern 5.6

  • Add a tavern floor
  • Increase default scale to match 28mm
  • New large floors included.
  • 27 April 2017 – 5.6 Includes solid Tavern
  • 10 July 2017 – 5.7 Complete levels included
  • 24 October 2017 – 6.0 Full Ground Level now has floor attached

Imperial Armory 1.2

  • 1.2 Includes floor section

Winterdale Ruins

  • 1.1 Large turret now correctly scaled
  • 1.2 The Base for the tower has been added
  • 1.3 Steps have been added
  • 27 April 2017 – 1.4 Includes a Solid Winterdale Ruins

French Farm House

  • 1.1 The large versions (uncut) have now ‘boolean flat’ bottoms

Hab Blocks

  • 1.0 re-scaled cannon
  • 1.2 Part 6R now has flat bottom
  • 1.3 The middle section is now available, allowing you to make larger structures.
  • 15 February 2018 -1.4 A HAB Block wall with door has been added with the door removed, giving the appearance of an open door.

Winterdale Blacksmith

  • 5.1 small items supplied as separate items

Rampage Heavy Wall

  •  1.1 Ladder has been added to the pack.
  • 20 September 2017-2.3 Contains New TRP D wall
  • 6 April 2018 – 3.1 Updated to Triplex and VG-TRP-Heavy-Wall tile added.

Rampage Crypt Walls

  • 1.1 Wall A has been added to the pack.
  • 1.2 Contains Crypt Door Grate
  • 20 September 2017-1.4 Contains 4 New D Walls, New D door and New D Gate
  • 2nd March 2018 – 1.5 Updated to Triplex
  • 5th March 2018 – 1.6  Pin version included.

Rampage Heavy Wall Arch

  •  1.1 B label was corrected to C label. Please note B was too small to fit an Arch.

Rampage Heavy Wall Door

  •  1.1 Includes the double door as a single file so you can print separately

Barbarian House

  • 1.1  Second roof option is now included with the gables having thicker upper beams.
  • 1.2 Contains the Solid Barbarian House.

Rampage Mid Wall S Tiles

  • 1.1 Columns added to file pack

Sword in Stone

  • 1.1 now all parts have correct scaling

Gothic Walls and Buildings

  • Zip file now includes cheat sheet.

Rampage Sewer Walls

  • 1.2 The SI- Sewer tiles have now been correctly named to I.
  • 1.3  The H tile has now been added.
  • 19 April 2018 -3.6 Updated to Triplex

Rampage Sewer Floors

  • F tile has been correctly named.
  • 19 April 2018 -Updated to Triplex

Rampage Mine Floors

  • 1.1 Includes E-Track-X, E-Track-T and R-Track.
  • 19 April 2018 -3.0 Updated to Triplex

Rampage Mine Walls

  • 19 April 2018 -2.3 Updated to Triplex

Rampage Secret Door

  •  1.1 Contains an S Secret Door.
  •  1.2 Secret Door now has an option B which is non wing to allow the doors to fit easier.
  • 16 April 2018 – 3.0 Updated to Triplex

Rampage Heavy Door

  • 1.1 Contains an X and S Heavy Door.

Bone Piles

  • 1.1 Inch Pile included

Trap Floors

  •  1.1  A new version of the Floor Axe trap ( E v3) has been added which has a thicker axe and supports.
  • 16 April 2018 – 3.0 Updated to Triplex

Extended Stone Floors

  • 1.1 Includes an NA and SC tile. The NA and SC have the ports positioned on the opposite sides allowing you to connect an EB to an E or an UB to a U.

Observatory

  •  5.1: Contains an updated version of the groundfloor.stl
  • 21 April 2017 – 5.2 Contains the solid version of the Observatory.

Castle Trial Pack

  •  1.1 Column L has been added.
  • 29 May 2017 – 1.2 Small mesh repair to A-Rpg-Brickarch-v1.0
  • 7 July 2017 – 1.3 Contains the Triplex version of E

Rulers

  • 1.1 Now contains Flamer Templates
  • 5th March 2018 – 1.2 Target Ruler 1.0 added. Original target ruler is in the legacy folder.

Bank

  •  1.2: Bank floor has had a small mesh repair.

Saloon

  •  1.1: Fixed a couple of technical issues in Saloon that may slow down slicing.
  • 01 May 2017 – 1.2: Small fix to the balcony (Saloon-sml-Floor2-B-v1.2)
  • 5 April 2018 – 1.6 Supports added and further thickening done to the windows of Saloon-Floor1 and Saloon-Floor2.

Castle Floors

  • 15 April 2017 – 1.1 File Pack now contains the 3/4 floor tiles EC and ED
  • 7 July 2017 – 1.4 Contains a XG Floor tile
  • 20 September 2017-1.5 Contains the NEW DS floor
  • 20 September 2017-1.5 Contains the NEW DS floor.
  • 21 September 2017-1.6 Contains the  TRP EA floor.
  • 16 February 2018 – 1.8 Updated to Triplex
  • 22 March 2018 – 2.0 Contains V Hatchway and E+A Hatchway

Arrow Slit

  • 15 April 2017 -1.1 Contains D-RPG-BrickWall-Slit-v1.3
  • 3 May 2017 – 1.2 Contains Z-RPG-BrickWall-Slit-v1.3 with small mesh repair.
  • 12 March 2018 – 1.5 Updated to Triplex

Roads and telegraph poles

  • 18 April 2017 -5.2 Contains 4 Long Straight roads

Rivers

  • 18 April 2017 -5.1 Contains the OpenLOCK version of the Rivers.

Alien Field Generator

  • 18 April 2017 -1.1 Contains OpenLOCK Alien Portal
  • 24 April 2017 – File now has only the correct base

Realm Portal

  • 18 April 2017 -1.1 Contains OpenLOCK version which includes a Brazier on an E Tile.

Necro Walls and Door

  • 18 April 2017 -1.1 Contains Crypt Door Grate

OpenLOCK Hex Layout Roads

  • 20 April 2017 -1.1 Contains End tile.

 Gothic Pipeline

  •  21 April 2017 -5.1 Contains a replacement Big Support with a repaired mesh.

Winterdale Merchants

  • 21 April 2017-UPDATE 5.2 Contains the solid version.

Winterdale Small Cottage 

  • 5.1 Correct file in file pack inc roof options for printing half or full roof
  • 21 April 2017 – 5.2 Contains a solid version of the Small Cottage
  • 16 May 2017 – 5.3  Cottage base now has a 2 part option.
  • 5th September 2017- 5.4 Repaired Cottage-Roofv02B-Solid-PART1-v2.1, Cottage-Roofv02B-Solid-PART2-v2.1

Winterdale War Cottage 

  • 5.0 Winterdale version with interiors
  • 5.1 Some object re-flatten the bottom
  • 5.2 New roof options
  • 21 April 2017 – 5.3 Contains solid version of the War tower
  • 5th September 2017- 5.4 Repaired Cottage-Roofv02B-Solid-PART1-v2.1, Cottage-Roofv02B-Solid-PART2-v2.1

S Castle Walls and Columns

  • 24 April 2017 – 1.1 Replacement I-T and I-X tiles which have had a mesh repair to the OpenLOCK port.
  • 7 September 2017 – 1.3 Repair made to S-RPG-Castle-Door-v1.1

OpenLOCK Tessellation Templates

  • 26 April 2017 – OpenLock 5.0 – Includes side locking system, column and buttress system and I-tile side locking system. 4.3 clip is the current clip and 4.0 has been discontinued.
  • 7 July 2017 – Triplex tiles are now include in OpenLOCK Templates along with more new tiles.
  • 26 September 2017 – 7.2 Upgraded to OpenLOCK Templates 7.2
  • 13 April 2018 – 6.3 OpenLOCK Clip updated to 5.3

Winterdale Water Mill

  • 27 April 2017 – 5.1 Includes Solid Mill
  • 17 July 2017 – 5.2 Contains WDMill5.0-A-basement-small

Castle Door

  • 2 May 2017 – 1.1 Have now replaced the Z-RPG-CastleDoor-v1.1 after a small mesh repair.
  • 12 June 2017 – 1.2 Small mesh repairs made to A-RPG-CastleDoor-v1.0, G-RPG-CastleDoor-v1.0, G-Step-RPG-CastleDoor-v1.0, P-RPG-CastleDoor-v1.1, X-RPG-CastleDoor-v1.1
  • 14 July 2017 – 2.2 The Castle Door supports have been redesigned to facilitate easy removal.
  • 17 July 2017 – 2.3 Contains a step option for all Castle Doors.
  • 13 March 2018 – 2.4 Updated to Triplex

Medieval House

  • 3 May 2017 – 1.1 Contains the correct MedHouseSmall Floor 2
  • 28 August 2017 – 1.3 Contains two large door options.

Low Wooden Wall

  • 16 May 2017 –  2.2 2.2 Small Mesh repairs to A-RPG-Hoarding-Roof-Wall-v2.2, BA-RPG-Hoarding-Roof-Wall-v2.2, Inch-RPG-Hoarding-Roof-Wall-v2.2, Z-RPG-Hoarding-Roof-Wall-v2.2
  • 16 April 2018 – 3.0 Updated to Triplex

Column and Buttress

  • 31 May 2017 – 1.1 Includes a Y Column and a Y Buttress
  • 5 July 2017 – 1.2 Includes a X Column
  • 20 February 2018 – 1.3 Updated clip ports.

Battlements

  • 31 May 2017 – Contains a Y Machicolations
  • 12 March 2018 – 1.2 Updated to Triplex

RPG Castle Ruins

  • 6 June 2017 – 1.4 Includes OR-Column-Low-Rpg-v1.0, OR-Column-Rpg-v1.0, OR-Column-Machicolations-v1.1
  • 9 June 2017 – 1.5 Includes FCR1-castle-floor-v0.2
  • 6 April 2018 – 2.1 Updated to Triplex.

TRP Heavy Door

  • 7 July 2017 – 2.0 TRP-A-Heavy-Arch-v2.0 now has front supports

Caribbean Church

  • 20 June 2017 – 1.1 The caribbean Church front Lv1-SML-A-v1.1, caribbean Church front Lv1-SML-B-v1.1,Caribbean Church front Lv1-v1.1 are now at the correct scale.
  • 3 July 2017 – 1.2 The gap between the rubble and walls has been fixed on caribbean Church front Lv1-SML-B-v1.2 & Caribbean Church front Lv1-v1.2

RPG Base Pack

  • 10 July 2017 – 6.0 Tiles now have multiple OpenLOCK ports. They are fully backwards compatible with all previous versions of Openlock.
  • 20 July 2017 – 6.1 The (A-TRP-Grate-v1.6)  has had the studs removed from one side so it can lay flat to be printed without supports.
  • 13 April 2018 – 6.3 OpenLOCK Clip updated to 5.3

Triplex Teplates

  • 1.1 Contains multiple Triplex floor tiles.

RPG Slate Roof

  • 25 July 2017 – 1.2 Contains  6 chimney options and a rounded roof corner tile to go on top of the F and G floor wall combination.
  • 31 August 2017 – 1.3 Contains A-RPG-Roof-3-End-Mirror-v1.1.
  • 20 April 2018 – 3.2 Updated to Triplex and Roof Mash now available.

RPG Stone Floors

  • 7 July 2017 – 1.3 Contains XG Stone Floor Tile
  • 21 September 2017 – 1.4 Contains EA-TRP-Stone-Floor-1.0
  • 10 April 2018 – 2.1 Updated to Triplex

TRP Crypt Walls

  • 7 July 2017 – TRP-A-Crypt-Arch-v2.0, TRP-A-Crypt-Wall-v2.0, TRP-BA-Crypt-Wall-v2.0 now have front supports.
  • 20 September 2017 – 2.1 Contains 4 new D Walls, new D door and new D Gate

Sheriff’s Office

  • 10 July 2017 – 1.2 Contains the cut version of the Sheriff’s office for small printers.
  • 4 April 2018 – 1.3 Adjustment made to scale of Sheriffs office for small printers.

Stone Barn

  • 11 July 2017 – 1.2 Contains the cut version

Sid Scale

  • 17 July 2017 – 1.2 The models gun and sword have now been clipped so that you can now see the base size and heights in the slicer.
  • 11 September 2017 – 1.3 Contains Sid Scale for FOW

OpenLOCK Stone Walls

  • 17 July 2017 – 1.1 Contains 508×508-StoneWall_T-section & 508×508-StoneWall_X-section

Church Wall

  • 28 July 2017 – 1.1 Contains Mirror tile versions; Church Wall End-Mirror-v1.1, Church Wall Ruin C-Mirror-v1.1, Church Wall Ruin End-Mirror-v1.1, church Wall Ruin-Mirror-V-v1.1

Hoarding

  • 9th August 2017 -2.1 Contains A-RPG-Walkways-sup-v0.18 & A-RPG-Wall-Wood-v2.0
  • 18th August 2017 – 2.2 Contains wooden columns
  • 15th March 2018 – Updated to Triplex

Cave Crawler

  • 15 September 2017 – 1.1 The bottom of the model is now perfectly flat

Citadel Grimskull

  • 2nd Otober 2017 – 1.2 Contains WD-Round-5.2-base and WD-Round-5.2-base-penta

The Dice Box of Death

  • 10th Octcober 2017 –  1.2 Minor mesh repair to Tomb to resolve an issue with some slicers.

Crypt Floors and Risers

  • 10 October 2017 –  1.9 Minor mesh repair to Tomb tiles to resolve an issue with some slicers.
  • 5th March 2017- 2.0 Updated to Triplex

Cathedral Walls

  • 25th October 2017 – 1.0 Contains Columns IB, LB & TB

Modular Plasma Stacks

  • 27th December 2017- 1.2 Chem Stack-Part 1-v1.1 pipe alignment made.

2D Printable Glass Window Inserts

  • 2nd February 2018 – G Window and AC Window added

Gothic Architecture

  • 15 February 2018 – 5.2 Added ruined and non ruined sections without windows, as well as standalone wall tiles without floors.

Nave Archway

  • 15 February 2018 – 1.1 Added a A floor tile to the base of the Archway.

Winterdale Dice Tower

  • 15th of February: 1.1 The connecting nubs on the ground level and 2nd floor have been strengthened.
  • 20th of March 2018 – 1.2 45 degree cuts were made in slope walls to spare filament.
  • 10th April 2018 – 1.4 Pegs strengthened on Dice-Tower-Ground-Floor-w-Tray-Part2-v1.1

Cathedral Ruins

  • 15th February 2018 – 1.2 AR1-Gothic-Arch-v1.0 and Gothic-Column-IBR-v1.1 has been added. The column is made to go with this Arch.
  • 13 April 2018 –  1.3 ARS2-Gothic-Arch-v1.2 addded.

Cathedral Floor

  • 15th February 2018 – 1.1 QS-Gothic-Floor-A-v1.0 added to file.

The Factory

  • 16 February 2018 – 1.2 Complete re-work of the file layout. Two folders, one with the 50×50 tiles and the other with the 100×100 tiles. All tiles resized to fit together at the 28mm scale.
  • 27 March 2018 – 1.3 Corrections made to size.

Castle Arches

  • 12 March 2018 – 1.2 Updated to Triplex

Rampage Wood Floor

  • 28th February 2018 – 1.1 Update to Triplex and Hatchway option.
  • 2 April 2018 – 1.2 Adjustment made to floor height.

Dwarven Archway

  • 1st March 2018 – 1.1 Archways with bases to attach to floors added.

Frigate

  • 2nd March 2018 – 5.5 Ship-big-front-v1.1 part placed to Zero origin.

TRP Wooden Floors

  • 22 March 2018 – 2.0 F-TRP-Wooden-Floor, G-TRP-Wooden-Floor, V-TRP-Wooden-Floor and Hatchways added. Removed pins from underneath of I and IA tiles.

Castle Low Wall

  • 13th March 2018 – 2.0 Updated to Triplex

Pew

  • 15 March 2018 – Small mesh repair.

Gothic Sci-Fi Spike Wall

  • 21 March 2018 – 1.2 Small Mesh repair to G wall.

Lifting Castle Gate & Arch

  • 27 March 2018 – 1.4 Updated to Triplex.

Log Cabin

  • 29 March 2018 – 2.2 Supports added and mesh repairs made. Side door now included separate from the cabin.
  • 30 March 2018 – 2.3 Roof and Cabin now interlock.

Demon Window

  • 5 April 2018 – 1.1 AC-Gothic-Demon-Window-v1.1 and BA-Gothic-Demon-Window-v1.1 added.

Demon Walls

  • 9 April 2018 – 1.1 AC-Demon-Wall-Low and BA-Demon-Wall-Low added.

Castle Secret Door

  • 9 April 2018 – 2.0 Updated to Triplex

Castle Window

  • 10 April 2018 – 2.0 Updated to Triplex

S Castle Walls and Columns

  • 10 April 2018 – 2.0 Updated to Triplex

Miners Shack

  • 13 April 2018 – 2.3 Improvements made to printability.

Heavy Low Risers

  • 16 April 2018 – 3.0 Updated to Triplex

Heavy Wall Arch

  • 16 April 2018 – 3.1 Updated to Triplex

RPG Low Wall

  • 16 April 2018 – 3.1 Updated to Triplex

OpenLOCK Alien Portal

  • 16 April 2018 – 3.0 Updated to Triplex

Thermae

  • 16 April 2018 – 3.0 Updated to Triplex

OpenLOCK Big Boy Cavern Tiles

  • 16 April 2018 – 3.0 Updated to Triplex.

OpenLOCK Cavern Tiles

  • 16 April 2018 – 3.0 Updated to Triplex

Gnarly Treepack

  • 17 April 2018 – 6.0 New Tree variations, also supports have been removed.

9 responses to “Model Updates”

  1. Philip Staker says:

    Thanks for the update. 🙂

    Is there anywhere that a file list / parts list can be put with the latest version / date loaded included for viewing or download.

    I have a number of the parts, from various of your ranges, and I’d love to be able to keep an accurate inventory?

  2. Nick Simmerson says:

    This is a great help, especially if the uploads get dated as well… it’s been a long time since I downloaded most of the files and I’m only just about to get my 3D printer 🙂

    Was there mention during the original KS that the Sword in the Stone would get a paint brush option for making Best Painted trophies? I think there was but I could just have imagined it!!

  3. Jeff Riordan says:

    Thanks for the update. Regarding updating can we just download the file again from our download section or will we need to purchase it again using the promo codes from the kickstarters/indie campaigns? I noticed that one file I have is 5.0 but the update file name is 5.3.

  4. Michael Grudowski says:

    Anyway you could provide the Observatory solid with out the second balcony so it can be printed with out support.

  5. patrick diederiks says:

    Thanks for the updates, realy nice way to take care of this.

Leave a Reply