Forum Replies Created
I can’t see any issues after rechecking the file can you please re download file.
I’d have a look at slowing downs your exterior wall speed. This tends to fix a lot of narrow column issues.
There will be an indication of size of larger pieces in the gallery photos on each product. Most of the products are designed for 200mm x 200mm x 200mm build volume and smaller if a small printer version is available.
No, there will be no top locking pins for low schist walls.
Zbursh and Blender are the two primary programs we use in our team.
Wooden dowel is the best for these.
These are now available for Tudor Walls, Schist walls and as part of the Chapel.
Looking good. Hope your Kickstarter goes well.
We’re releasing Top locking versions of the walls shortly. As the the stairs and ramps outside we’re working on streets and raised foundations that you will find useful as one of the stretch goals in the Clorehaven Kickstarter.
Have a look at this troubleshooting guide .
It’s going to be different steps you may need for different printers and slicers.
That ‘s pretty cool. Something I might have to use myself.
… and perhaps an entire range of evil elf stuff? If we’re going to do evil elf walls we would probably go to town on the concept…and create a evil elf town kickstarter. This might be something we do in the future. If we were to do it it, I’d want to do it right and do a whole range. Something that would be very cool for doing in the future.
Sounds like it maybe under-extruding if it’s snapping. You might also have a look at your travel and jerk speeds and whether the nozzle is hitting the model to knock it over.
A great Idea, I’ve added it in for future design.
The P walls and O floors are slightly larger but will allow you to create an octagonal room.
There is one in the Legacy folder in the Tesselation templates zip. For other ones you can do an inverse boolean on the tessellation templates to create a bool tool specifically for any other pieces you may need..
@dreadknot69 It’s sceheduled to start design soon but wont be ready for christmas.
@Dreadknot69 No I’m not referring to the raised grotto pieces. This is part of the Grotto Ramps & Columns Stretch goal.
Re: Blacksmith @swcunliffe We’ll have a look at that when it gets deisgned
Re: LED option @dust.fire It will be a small LED light and battery, we’re finalising the details soon
Re: Lava PDF @mokumegallery A great suggetion.
Re: Texture base plate @Allari That’s something we can possibly look at doing.
Re: Cave Wall LED torches @1776 Possibly if we have enough time.
Re: Beehives @kagbb Probably in another kickstarter at this stage
Re: A quarry to mine wall @Cratesbane this we could add in easily.
Re: Tudor Street Support variant @mikejay Possibly if we have enough time.
Re: Raised Crystal Caverns @jonathanquek maybe, this list is about small tweeks and that set will take a lot more time as it’s a complete stretch goals worth of work.
Re: Raised platforms and ramps @dreadknot69 This was one of the stretch goals. We will be doing this.
We’re releasing alternate wall versions with toplocking pins very soon.