Mike Los

[Mike Los]

Hi Dennis,

Good question! The Kickstarter campaign will end on July 20th, we will send out the pledge manager and the core pledges will be available for download shortly after.
The stretch goals will become available as they become ready over the coming months afterward. There should be a few ready to go not long after the campaign finishes.
So depending on how far the campaign goes is how long it takes to get all the stretch goals released.

• This reply was modified 2 years, 2 months ago by Nicholas Jebson.

[Mike Los]

Hi Asger,

Thats a very good idea, I’ll pass it onto the team to look at implementing for the future.
We’re always looking to improve our products and appreciate your thoughts!

[Mike Los]

Hey Fabrizio,

Hope these pictures help to line up your tower!
The back left corner is only just touching due to the ruined state of the tower.
Let us know if you need any other tips or advice 🙂

Attachments:

1. 

   Tower-1-1-scaled.jpg
   

2. 

   Tower-2-1-scaled.jpg
   

3. 

   Tower-3-1-scaled.jpg
   

4. 

   Tower-4-scaled.jpg
   

[Mike Los]

Hi Dennis,

Thanks for reaching out, the photo of the failed prints is hard to look at for any 3d printing enthusiast but we’ve all been there!
My immediate thought would be to look at the stability of your printer and the printer head speed. If the printer is on a wobbly surface then movement whilst printing might break those thin parts of the model. On a similar note if the printer head is moving too fast it could knock some of those smaller pieces when printing.
To get down to the bottom of it would mind sharing a screenshot of your printer settings? Maybe it will reveal a clue to help to solve this issue

[Mike Los]

Thanks for letting us know, we’ve added it to be updated and will let you know when its ready 🙂

[Author]

Posts