Forum Replies Created
-
AuthorPosts
-
Matt Barker
KeymasterThey look fantastic, did you get around to painting them up ?
Matt Barker
Keymaster@Panderps, Ill check that to see if we can easily make some more of them
Matt Barker
Keymaster@ Lisa, yes that’s true, Ill add those to the list
March 27, 2019 at 10:28 am in reply to: How do I get a licence to use the OpenLOCK system commercially ? #142215Matt Barker
KeymasterAnyone can use these templates too make their own OpenLOCK compatible tiles and distribute them for free. These are the templates https://www.printablescenery.com/product/open-lock
If you want to sell your own OpenLOCK compatible tiles, we can offer you a BSD. This license is free, exclusive, never expires, and cannot be transferred.
You can use the OpenLOCK system for commercial purposes
You need to use the OpenLOCK compatible logo where appropriate
You need to show a link to https://www.printablescenery.com where appropriatePlease contact us if you would like a free commercial OpenLOCK licence
Matt Barker
KeymasterYes, that’s something we could look at in the future for sure
Matt Barker
KeymasterAs a rule of thumb, the resin printing is about 10 x the cost per pound compared to printing with PLA.
Matt Barker
KeymasterThis is a great video that shows you how to make a homemade a lightbox.
To take great pictures of small objects you need soft all-around light, you should also use white lights at 5600k so they mix with daylight
-
This reply was modified 1 year, 11 months ago by
Matt Barker.
Matt Barker
KeymasterLooks great, do you have a few more photos from different angles?
Matt Barker
KeymasterYes, those uprights are quite thin, if the Z is not perfectly aligned they can break. We could thicken the parts slightly to help with the printing.
Matt Barker
KeymasterThe filament hinge is really strong, I’m sure it wont break
Matt Barker
Keymaster@Benethor, The fit for the secret door is quite snug, You need to clean it up to make sure there is no debris around the socket or the pin.
Matt Barker
Keymasterits working now
Attachments:
Matt Barker
KeymasterGreat review
February 16, 2019 at 6:25 am in reply to: Starship III (less than 12 hours to go) Kickstarter #136826Matt Barker
KeymasterI backed it 🙂
Matt Barker
Keymaster@Robert, you can link to photos or your photos must be under 1MB
-
This reply was modified 2 years ago by
Matt Barker.
-
This reply was modified 2 years ago by
Matt Barker.
Matt Barker
KeymasterYou can post video and image links and they will show as a preview, like Youtube videos and https://imgur.com photos
Matt Barker
KeymasterLooks good Kieth, I also have one of those smoke machines. it works quite well.
Matt Barker
KeymasterThe short answer is yes, we will provide those soon. At the moment one of our designers is working with the team from Architects of Destruction to make the Templates for the injection molded Rampage Dungeons. Out of that will come the STEP files for the main templates which will be volume based objects as opposed to mesh based.
Matt Barker
KeymasterThat’s looking great, we also have a stone dungeon pitch to go with that if you painted the tiles in a kind of mud look. Or you can scale up some Rampage tiles.
-
This reply was modified 2 years ago by
Matt Barker.
Matt Barker
Keymaster@Zoltan, yes I think that’s how the new update will work. the IT guys should be installing it today
-
This reply was modified 1 year, 11 months ago by
-
AuthorPosts