Shop

Rampage BASE PACK

Free!

Interchangeable Walls !!!

Rampage System the first truly modular interconnecting scenery building system that allows you to build everything from beautiful dungeons to large buildings and fortifications.

Rampage system uses OpenLOCK locking clips to attach the walls to the tiles so you can interchange the floors and walls and make amazing combinations. The walls tessellate perfectly allowing you to make true form tiles, rooms and buildings. The detachable walls literally mean that you can build anything.

Save

This product will be delivered as a .ZIP file pack containing STL files for use on a home 3d Printer. The files are set to 28mm scale but can be rescaled before printing

Available: In stock

Product Description

 

UPDATE 4.3, contains the  4.3 and 4.0 OpenLOCK clips. These clips have slightly shorter ends so that you can connect them on the corners of the I tile. 4.3 is a slightly closer fit and will pull the tiles togeather more firmly. Use 4.0 if you feel they are too tight.

Swap walls and floors  — Truly modular  – Pieces Lock-in-place  –  Connects 360 – Will tessellate perfectly – Compatible with other systems

Rampage system uses OpenLOCK which can connect any two pieces of scenery together and allows you to connect exterior walls, balconies, bridges or dungeon tiles

Rampage is a versatile building system for all types of wargames and roleplaying games it looks amazing.

The Fee Trial Pack contains 5 Walls a floor tile and 5 end tiles. The images below are from our up and coming crowdfunding campaign.

rampage-dungeon-tiles

 

 

 

instructions

 

tesilation-sheetinstructionsinstructions

3d-printable-dungeon-tilesinstructions

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Additional Information

File Type

STL files in ZIP folder

Infill

15%

Layer Height

.2 for Normal Quality (Rcomended) .1 for High Quality

Supports

Prints without Supports

Print Volume

Rampage Tiles have a maximum size of 4 inches (102mm). So you will need a 102 x 102 x 102mm print volume, Rampage tiles cannot be scaled., This item is set to 28mm scale and can be printed on a 4inch x 4inch x 4inchmm print bed

Q&A

  1. :

    The Description shows to remove supports with needle nose pliers, but the Additional Information says supports aren’t needed. Is it recommended to print with supports or without?

    • :

      Hi, yes you don’t need supports, they are built into the model. It’s a good idea to print with a ‘brim’ this will make sure you get nice flat prints

  2. (verified owner):

    Hi. Should I print the clips with 15% infill? Or do they need more to be stronger?

    • :

      I normally print the clips with 15% infill, they work great.

  3. (verified owner):

    Hi Matt, I seem to have issues with the wall pieces. The more extruding stones on them always have stringing on the bottom. Quite severe actually. There are always 5-10 separate strings of filament that are just sticking into the air. I tried printing with 0.2 and 0.15 mm layers on a 0.4 mm nozzle using PLA and several variations of infill. Its always the same. It seems as if they might need supports but I was thinking that might be a bit overkill. Any recommendations?

    • :

      Hi Dennis

      The walls do have some stringing under the large protrusions, this isn’t that noticeable but it can be removed with a knife. Ill do a blog on this soon

  4. :

    Do you print the clips on a brim or a raft?

    • :

      It depends on your printer, but I normally print the clips with a brim

Add a Question