Shop

Winterde War Cottage 5.0
Winterde War Cottage
Winterde War Cottage
Winterde War Cottage
Winterde War Cottage
Winterde War Cottage
Winterde War Cottage
Winterde War Cottage
Winterde War Cottage
Winterde War Cottage
Winterde War Cottage
Cottage V02
Cottage V02
Cottage V02
Cottage V02
Cottage V02
Winterde War Cottage 5.0
Winterde War Cottage 5.0
Winterde War Cottage
Winterde War Cottage
Winterde War Cottage
Winterde War Cottage
Winterde War Cottage
Winterde War Cottage
Winterde War Cottage
Winterde War Cottage
Winterde War Cottage
Winterde War Cottage
Cottage V02
Cottage V02
Cottage V02
Cottage V02
Cottage V02
Winterde War Cottage 5.0

Winterdale War Cottage

$14.95

The Winterdale War Cottage

Interior fully modeled

Optional doors and floor

New roof option to print flat

This product isĀ delivered as a .ZIP file pack containing STL files for use on a home 3d Printer. The files are set to 28mm scale but can be rescaled before printing

Available: In stock
If you are a Kickstarter backer you must login to access your pledge

Description

Winterdale War Cottage 5.3

Updates

  • 5.0 Winterdale version with interiors
  • 5.1 Some object re-flatten the bottom
  • 5.2 New roof options
  • 21 April 2017 – 5.3 Now contains solid version of the War tower

Right click and download the reference sheet below.

 

Capture pt 1

Capture pt2

Additional information

Infill

20%

Layer Height

.2 for Normal Quality (Rcomended) .1 for High Quality

Supports

Prints without Supports

Q&A

  1. Can this be printed without the ‘castle part’ on the side? I see some peices are blank on the side where that piece would be attached, are there optional parts included in this bundle that allow you to have all 4 sides of the tower decorated?

    • No, this is designed to be printed a standalone piece, However, the top cottage part can be used as a standalone piece.

      The Tower section will need to be placed back against something as will the side hut.

  2. (verified owner)

    Hi Matt, how can i print the “TowerBattlementV02”? At layerheight 6.05 and up it printed into the air ….. and i have no chance to print the tile šŸ™ any hints?
    My printer is a Prusa I3 MK2, first layer 0.25, rest 0.2.

    • That part is one of the few parts that needs supports touching buildplate switched on.

Add a Question